Profoto D4 Guia do Utilizador descarregar pdf (Página 6)

ProRing

www.profoto.com

ProRing

The ProRing is an entirely mobile source of light. The interior diameter of 100 mm provides plenty

of space for professional camera lenses. Since the camera holder can be tilted forward and

backwards, as well as upwards and downwards, most cameras can be attached. This makes

an excellent source of light in cramped areas, for example the interior of an automobile. Many

fashion photographers also use the ProRing to find new angles and capture details. The ProRing

provides a very distinct, directed light, but can be complemented by a soft or a widesoft Reflector,

which increases the light source, thereby producing a softer light with fewer sharp shadows. For

close ups, there is a reflector that focuses the light 50 cm in front of the camera lens. The ProRing

modeling light is controlled by a ON/OFF switch at the back. The modeling light consists of ten 12

V 20 W halogen lamps. The ProRing is equipped with a Ozone free High Power Quarts flash tube

for unlimited use.

Brief Instructions

» Connect the Ring Flash to the generator socket.

» Switch the MODEL switch to ON

Mounting Reﬂector

» Remove the two ridged screws fixating the camera holder.

» Remove the four ridged nuts holding the outer and inner reflectors together.

» Run the lamp cable through the outer reflector and let the reflector slide into position.

» Reassemble the outer and inner reflectors using the ridged nuts.

» Reassemble the camera holder using the two ridged screws.

Lock clasp

Adjust reflector to desired

position before locking

MOUNTING REFLECTOR

Unlock clasp

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Profoto D4 Guia do Utilizador Página 6